Aug 03 2009

Pass4Side tt0-201 PDF考古題

Posted by admin in CTP

CTP認證tt0-201考試考古庫介紹

考試代號: tt0-201
問題數量:260 Q&As

更新時間: 2009-08-03
註冊地點: Prometric/Pearson VUE
考古庫全稱:Convergence Technologies Professional 2007

CTP tt0-201學習指南

CTP Certification認證 tt0-201考試已經證明了它在全世界的廣泛性和重要性,因此明白這項認證考試的世界各地的人必須具備與認證考試相關領域所需的技能和知識。CTP認證 tt0-201學習指南的目的是檢查考生的能力和他對概念的意識。很多時候練習測試tt0-201考試都已經被修改過了,刪掉了許多過時的東西,而那些需求是在考試課程。當應用到時候你所學的知識的時候,就會鑒定出你所學到的東西以及對所學知識的應用是多麽的恰到好處。CTP認證 tt0-201是在IT行業的知名品牌,所以如果您通過了這樣一個知名公司舉行的一次考試,你可以想象你將來的事業會做的多麽好。

想要通過這個考試當然存在很多困難。你所要做的就是準備好充足的勇氣和信心,而這些都來源與你平時訓練的好壞.建議大家可以去Pass4side這個網站看一下,它的tt0-201考試是為了測試您在這方面的知識的掌握程度,最好的部分是它可以使你不斷更新你所學的知識,不斷進步。如果你知道所有的概念和如何使用他們的時候才是你真正掌握了Pass4side的用意。這門考試檢查了您的能力和一旦你通過這次考驗你將成為最優秀的人才,其他tt0-201考試的Pass4side結算值得註意的影響就是你的薪水將直線上升這大概也是每個人都希望獲得的,所以要找一些好的資源才行。

Pass4Side考題大師tt0-201試題都是考試原題的完美組合,覆蓋率95%以上,答案由多位專業資深講師原版破解得出,正確率100%,只要您使用Pass4Side的考試考古庫參加tt0-201考試,保證您一次輕松通過考試;

售後服務第一!我們相信要想在當今時代取得成功,必須為廣大用戶提供全套的周到細致的全程優質售後服務,只有客戶滿意了,才能發展。客戶至上是Pass4Side考題大師的一貫宗旨;

免費tt0-201考古庫Demo賞析

 
 
Exam : CTP TT0-201
Title : Convergence Technologies Professional 2007

1. Which of the following will best help you determine the presence of bottlenecks in a switched LAN?
A. Disabling frame tagging
B. Enabling VLAN hopping
C. Establishing a baseline
D. Creating an Acceptable Use Policy (AUP)
Answer: C

2. Which element of a convergent network does a connection-hijacking attack typically exploit?
A. Soft phones
B. Wireless network radio frequencies
C. The TCP three-way handshake
D. Network Address Translation (NAT)
Answer: C

3. Which device specializes in admitting calls into a network, manages session traffic, and helps traffic traverse a firewall?
A. Layer 3 switch
B. Multipoint Control Unit (MCU)
C. IP Multimedia Subsystem (IMS)
D. Session Border Controller (SBC)
Answer: D

4. In which of the following layers of the OSI/RM would you find Session Initiation Protocol (SIP)?
A. Network layer
B. Physical layer
C. Session layer
D. Application layer
Answer: D

5. Which of the following is most likely to cause packet loss and clicking during a phone call?
A. Impedance mismatch
B. Improper reference clocking
C. Improper equipment grounding
D. Packets arriving out of order
Answer: B

6. Which of the following can cause the most significant interference with WiFi communications?
A. Ethernet hubs
B. Television equipment
C. 2.4-GHz cordless phones
D. 900-MHz cordless phones
Answer: C

7. Consider the following output of the tracert command:
Tracing route to www.CTP-certified.com [164.128.206.2] over a maximum of 30 hops:
1 2 ms 1 ms 2 ms 192.168.1.1
2 13 ms 9 ms 12 ms 10.160.64.1
3 10 ms 11 ms 11 ms 68.2.9.21
4 9 ms 10 ms 8 ms 68.2.13.166
5 9 ms 12 ms 13 ms 68.2.13.30
6 27 ms 16 ms 9 ms chnddsrj02-ae2.0.rd.ph.cox.net [68.2.14.5]
7 32 ms 24 ms 20 ms langhbr01-ae0.r2.1a.cox.net [68.1.0.232]
8 21 ms 25 ms 25 ms eqix.lsan.twtelecom.net [206.223.123.36]
9 18 ms 18 ms 24 ms 66.192.251.26
10 40 ms 33 ms 35 ms core-01-so-0-0-0-0.phnx.twtelecom.net [66.192.7.17]
11 36 ms 42 ms 39 ms hagg-01-ge-0-3-0-510.phnx.twtelecom.net [66.192.247.73]
12 40 ms 43 ms 45 ms 206-169-207-8.static.twtelecom.net [206.169.207.8]
13 44 ms 51 ms 42 ms www.ctpcertified.org [64.128.206.2]
Trace complete.
Line 4 includes the string "9 ms 10 ms 8 ms." What do these numbers indicate?
A. The average time it took for the router to respond
B. The router’s three interfaces that are able to respond to the tracert query
C. The response time for the three packets sent by tracert to return from the router
D. The time it takes for intervening hosts to process the packets between your host and the router in question
Answer: C

8. Which of the following best describes differences between DiffServ and 802.1p?
A. DiffServ uses Layer 3 devices for QoS, whereas 802.1p uses Layer 2 devices for QoS.
B. DiffServ requires an Application Layer Gateway (ALG), whereas 802.1p requires a Layer 3 switch.
C. DiffServ uses Layer 2 devices for QoS, whereas 802.1p uses Layer 3 devices for QoS.
D. Microsoft’s Packet Scheduler uses DiffServ at Layer 7 of the OSI, whereas Cisco products use 802.1p at Layer 4 of the OSI.
Answer: A

9. Which of the following describes the proper sequence of the TCP handshake?
A. The client sends an RST packet, the server issues an ACK packet, and the client replies with an ACK packet, completing the handshake.
B. The client sends a REQ packet, the server sends a SYN packet, and then the client replies with a FIN packet, completing the handshake.
C. The client sends an RST packet, the server sends a SYN packet, and then the client replies with a SYN ACK packet, completing the handshake.
D. The client sends a SYN packet, the server sends a SYN ACK packet, and then the client replies with an ACK packet, completing the handshake.
Answer: D

10. Which of the following codecs specifies a voice stream operating at 8 Kbps, is less complex than G.729, and yet obtains roughly the same Mean Opinion Score (MOS)?
A. G.711
B. G.723
C. G.726
D. G.729a
Answer: D

11. You want to connect a PBX made by one manufacturer to another PBX made by a different manufacturer. You need to ensure that these interconnected PBXs will retain their basic and supplementary services. Which protocol was originally designed to allow this?
A. H.225
B. H.450
C. Q.932
D. QSIG
Answer: D

12. Receiving a fax as an e-mail attachment is an example of which technology?
A. Circuit-switched faxing, as defined by T.30
B. Multipoint application sharing, as defined by T.128
C. Store-and-forward faxing, as defined by T.37
D. Multipoint still image exchange, as defined by T.127
Answer: C

13. Which of the following is responsible for ensuring that incoming customer calls are properly queued according to the order in which they were received?
A. SIP proxy
B. Edge router
C. Automatic Call Distributor (ACD)
D. Analog Telephone Adapter (ATA)
Answer: C

14. When calculating bandwidth consumption, which of the following factors should you consider?
A. Reference clocking settings, ESP mode, and BOOTP settings
B. Codec, Ethernet overhead, and silence suppression (if supported)
C. Codec, BOOTP settings, and Maximum Transmission Unit (MTU) settings
D. Maximum Transmission Unit (MTU) settings and NAPTR records
Answer: B

15. Your team has determined that the voice quality of a video transmission is too low. What Mean Opinion Score (MOS) would indicate a low level of voice quality?
A. 2.5
B. 3.6
C. 45
D. 77
Answer: A

16. Which of the following are common elements of a Call Detail Record (CDR)?
A. Conversation time, QoS results, and caller
B. Caller, duration, and amount billed for each call
C. Amount billed for each call, IP address of calling host, and QoS results
D. IP address of calling host, duration, and Mean Opinion Score (MOS)
Answer: B

免費下載tt0-201考古庫Demo

Pass4Side提供最新的CTP Certification認證 tt0-201考古庫,其全名為:(Convergence Technologies Professional 2007). 在您決定是否購買之前 可以先下載tt0-201考古庫的部分演示. Pass4side是全球唯一提供所有IT認證考試考古庫demo免費下載的廠商 ,以下為免費tt0-201模擬測試題的下載鏈接

免費的tt0-201考古庫PDF下載鏈接

友情鏈接 | Examsoon  思科熱門認證考試題庫  IT認證考古題  考古題考試模擬軟件  IT認證研究  CCNA全真認證題  ST0-94X  000-979  640-802  70-647  642-357  HP0-J43  HP0-P14